Enhanced airborne sound absorption effect in poly(vinylidene fluoride)/(K0.5Na0.5)NbO3-nanofiber composite foams

Introducing electrical conductive function to discharge local piezoelectric effect is found effective for improving airborne sound absorption performance. In this work, instead of conductive fillers, a composite with two piezoelectric materials with opposite piezoelectric responses was explored aiming at enhanced sound absorption effect. Open-cell poly(vinylidene fluoride)/(K_0.5Na_0.5)NbO₃ (PVDF/KNN)-nanofiber composite foams were proposed and investigated for airborne sound absorption purpose. Structural and thermal analyses showed that the KNN nanofibers were well dispersed in the PVDF matrix and enhanced the degree of crystallinity of polar phase of PVDF. Significantly enhanced airborne sound absorption over a broad frequency range was observed in the PVDF/KNN-nanofiber composite foams, with increasing KNN nanofibers. One possible mechanism for the improved sound absorption with the piezoelectric KNN nanofibers with positive piezoelectric coefficient added in the PVDF matrix with negative piezoelectric coefficient is that electrical discharge could be facilitated for energy dissipation with the opposite charges generated through the piezoelectric effects in the two phases with opposite polarity. The experimental results show that the open-cell PVDF/KNN-nanofiber composite foams are promising for broadband airborne sound absorption application, and our analysis shed a light on the strategy in designing piezoelectric composite foam with high sound absorption performance.     

Linear correlation between pH value of stimulated beef and electrical current intensity

The aim of the present study was to determine mathematical relationships between pH changes in beef 24 h post-slaughter and changes in the intensity of electrical current flowing through bull and heifer carcasses during high-voltage electrical stimulation. The electrical stimulation was applied 40 min postmortem for 120 s. The pH values of m. longissimus thoracis et lumborum were analyzed in the function of electrical current intensity changes and its change during electrical stimulation. Mathematical linear correlations of the y = ax ± b type were demonstrated between pH values at 2, 6, and 24 h postmortem and the initial (I_i) and ultimate (I_u) electrical current intensity values, the difference between them and the initial pH values determined before electrical stimulation. High multiple correlation coefficients (R² = 0.416, α ≤ 0.001) between I_u and pH values 24 h post-slaughter enabled concluding that there is a possibility to predict a pH value of stimulated carcass with high accuracy, and thus also beef quality, based merely on the ultimate electrical current intensity values.     

Investigations on Emission Characteristics of a Liquid-Fueled Trapped Vortex Combustor

The combustion and emission formation process of liquid fuel in the trapped vortex combustor(TVC)are very complicated.A trapped vortex combustor with replaceable bluff-bodies was designed to investigate these processes.The bluff-body widths varied from 0.021 m to 0.036 m.Experimental tests were carried out.Liquid RP-3 aviation kerosene was used in the tests.Emissions were measured under atmospheric pressure.The combustion process was analyzed theoretically in the viewpoints of relative evaporation time,mixing time and reaction time.Numerical simulations were also conducted to help analyze the formation and depletion processes of pollutants in TVC.The results reveal that atomization was a critical factor for formation and depletion processes of pollutants.By controlling mixing speed of burned and unburned gases and thus fuel-air uniformity,turbulence intensity could also affect emission levels.In addition,residence time also affected the emissions by affecting combustion completeness and the time for NOx formation.All these factors were combined in a complicated way to affect combustion process and pollutant emissions.     

Photoluminescence and temperature sensing of lanthanide Eu3+ and transition metal Mn4+ dual-doped antimoniate phosphor through site-beneficial occupation

For a long time, rare-earth ion-doped phosphors have been widely used in temperature sensing because of their excellent light-emitting properties. However, most of the rare earth elements are relatively rare and expensive, so the transition group elements that are economical and easy to obtain have been favored by researchers. This paper presents a new type of phosphor doped with rare earth ion and transition metal for optical temperature measurement. In recent years, Mn⁴⁺-doped phosphors have attracted wide attention because of their strong deep red light-emitting properties. La₂LiSbO₆ provides a good host environment for Mn⁴⁺ and Eu³⁺ due to its unique crystal structure. In this paper, a series of La₂LiSbO₆ phosphors singly doped with Mn⁴⁺ and Eu³⁺, and co-doped with Eu³⁺/Mn⁴⁺ were synthesized. The crystal phases and optical properties of these materials were characterized and analyzed in detail. We specifically studied the temperature dependence of the fluorescence intensity of the optimized La₂LiSbO₆: Eu³⁺, Mn⁴⁺ phosphors at 303K–523K. The experimental results prove that the thermal responses of Mn⁴⁺ and Eu³⁺ are different. With increasing temperature, the thermal quenching of the Mn⁴⁺ fluorescence intensity is much faster than that of Eu³⁺, so the temperature characteristics can be explored by the fluorescence intensity ratio (FIR) of Eu³⁺ to Mn⁴⁺. At 523 K, its maximum relative sensitivity and maximum absolute sensitivity can reach 0.891% K⁻¹ and 0.000264 K^-1, respectively. Our experimental analysis shows that La₂LiSbO₆:Eu³⁺/Mn⁴⁺ phosphors have relatively high temperature sensitivity and have potential application prospects in the field of high temperature sensing.     

相邻雷达回波强度差异分析

文章选用2017-12-13的青浦站和南通站体扫数据和单站格点CAPPI数据,利用时空一致性匹配法和单站格点数据等距离线法对两站雷达回波强度差异情况进行了研究,并分析了两种算法可能存在的误差,结果表明:单站格点数据等距离线法要优于时空一致性匹配法,更适用于单部雷达体扫数据的相邻雷达回波差异对比;在雷达基数据正确的情况下,时空一致性匹配法误差主要来源于做不到真正的时空匹配一致,格点数据等距离线法误差主要来源于生成格点数据时插值算法不完善。     

月桂酸乙酯的液相音速测量

脂肪酸甲酯(FAMEs)、脂肪酸乙酯(FAEEs)是生物柴油中的重要成分,为了计算发动机燃油喷射角度,需要获取生物柴油组分的音速。利用动态光散射法,在0.1、2.0、4.0、6.0、8.0 MPa下测量了月桂酸乙酯的液相音速,温度为295.15～353.15 K。为满足工程应用需求,根据实验数据,给出了月桂酸乙酯音速与温度和压力的关联式。在实验温、压范围内,实验值与关联式计算值的相对偏差绝对平均值为0.32%。     

用于阀芯类零件去毛刺的磁极板优化设计与实验研究

目的 为解决阀芯类零件节流边毛刺去除不均匀和效率低下的问题，对磁极板尺寸和曲率进行规律性研究和实验验证。方法 首先，用Maxwell仿真软件对磁极板的各个参数进行规律性仿真，得出合适的磁极板尺寸;其次，为提高加工区域的磁感应强度值，设计了曲面磁极板，并对其相关参数进行仿真;最后对优化后的装置进行磁感应强度测试，并使用液体磁性磨具对45钢和阀芯棱边毛刺进行去除实验。结果 根据仿真结果发现，磁极板长度比工件大20 mm时，工件轴向磁场分布最均匀，磁极板厚度对磁场影响较小，磁极板宽度应根据加工间隙进行选择。曲面磁极板可以加强加工区域的磁感应强度值，曲率半径越小，加工区域获得的磁感应强度值越大，其中半圆形磁极板效果最佳。对装置的磁感应强度测试也表明，将工件置于磁场中后，其表面磁感应强度值最高达600 mT左右，满足加工需求。最后通过加工实验发现，在转速为500 r/min的条件下，阀芯节流边的毛刺去除效果理想，且轴向加工均匀。结论 该装置可以对阀芯这类导磁性回转类零件产生良好的加工效果。     

Flame spectroscopy of waste tire oils and waste cooking oils blends using coaxial burner

Waste tires and cooking oil pose a serious danger to human health and environment. Self-reacting pyrolysis system for waste tires is designed and constructed for converting waste tires into oil that could be used as a sustainable fuel. This study aims to analyze the thermal microstructure of conventional fuels like light diesel oil (LDO) and heavy diesel oil (HDO) as well as blended with waste cooking oil (WCO) and tires pyrolysis oil (TPO) using a co-axial burner via flame spectroscopy analysis. The first Blend 1 (B1) consists of 20% WCO + 80% LDO, the second one (B2) consist of 20% WCO+80%HDO and the last one (B3) was 20%TPO and 80% LDO by mass. This percentage was chosen carefully and according to previous combustion characteristics results. The experimental results showed that B1 will shrink C2 radicals by nearly 61% and 64.5% at Ф = 0.63 and 0.96 respectively. B2 will decrease C2 radicals by nearly 19% and 82% at Ф = 0.63 and 0.96 respectively. Finally, B3 will reduce C2 radical's intensity by nearly 39% and 58% at Ф = 0.63 and 0.96 respectively. TPO produced CH emission radicals lower than that of LDO by nearly 5.9%. LDO droplets absorbed more radiation energy needed for excitation than that of WCO due to droplet size and fuel physic-chemical properties. B2 fuel is recommended to replace LDO at Ф = 0.63 and 0.96.     

钢轨交流闪光焊接过程过梁爆破特征分析

以高速摄影技术作为主要研究手段，研究钢轨交流闪光焊接过程过梁爆破特征，并结合热成像系统采集焊接过程温度场，以此为数据基础定量分析了钢轨交流闪光焊接过梁爆破特征. 结果表明,钢轨交流脉动闪光焊接工艺模式下，加速闪光阶段具有几个阶段中最高的闪光频次46.93次/s，脉动闪光阶段具有最低的闪光频次11.07次/s；连续闪光阶段闪光烈度为0.009 2 mm/次，是几个阶段中最强的，脉动阶段的闪光烈度最弱，为0.003 8 mm/次；从闪光加热因子来看，脉动阶段最高，符合了该阶段积累热量的主要目的；加速闪光阶段最低，是由于该阶段为了制造保护气氛产生的气化过梁带走了较多的热量；从闪光均匀度看，闪光最不均匀的阶段是闪平阶段，最均匀的阶段是脉动阶段，这恰恰说明了两待焊端面的微观平行情况在闪平阶段最差、脉动阶段最佳.     

Microarray analysis of high light intensity stress on hydrogen production metabolism of Rhodobacter capsulatus

Biohydrogen obtained from purple non sulfur bacteria (PNSB) is an environmentally friendly alternative for hydrogen production. PNSB can be employed in large scale outdoor photobioreactors to produce hydrogen by photofermentation with sunlight as the light source. In external environmental conditions, however, bacteria can experience stress due to high light intensities, which can inhibit or slow down hydrogen production. Previous studies with other PNSB showed varying responses to light intensities (above 4000 lux), in some cases improving, and in others adversely affecting hydrogen production.In this study, Rhodobacter capsulatus, a PNSB species that produce hydrogen efficiently from dark fermenter effluents containing acetate, was used to investigate the effects of high light intensity stress on the hydrogen production metabolism at the gene expression level. A microarray analysis was carried out using a custom-design Affymetrix GeneChip TR_RCH2a520699F. R. capsulatus DSM1710 was grown under a cyclic illumination of 2000 and 7000 lux (12 h light/12 h dark) in a hydrogen production medium having 30 mM acetate and 2 mM glutamate, and was exposed to a high light intensity (10,000 lux) for 1 h in the middle of a light period. The results reveal that photosynthetic reaction center genes were down-regulated in order to protect the photosynthetic membrane from damage. On the other hand, the expression of nitrogenase and electron transport system genes were enhanced by high light intensity. These results show that a high light intensity stress drives R. capsulatus to direct gene expression towards hydrogen production, which supports the hypothesis that hydrogen production is a way for the disposal of excess reducing equivalents to maintain the internal redox balance.